Now this is podracing! The latest addition to our Micro Galaxy Squadron collection is the Boonta Eve Battle Pack, which includes two podracer vehicles.

This battle pack is marked as ‘series 1’ but does not have a ‘launch edition’ foil sticker. It is currently available in-store at branches of The Warehouse in New Zealand for a retail price of NZ$45.00 each (approximately US$28.47 at time of writing).

The assortment number for this battle pack is SWJ0093 112522 GC

Watch our full unboxing video below –

This Battle Pack includes two vehicles, that at this time are not available individually – Anakin Skyalker’s Podracer and Sebulba’s Podracer, as seen in The Phantom Menace. Each vehicle also includes a small figure that fits into the cockpit.

Each vehicle comes with a clear plastic stand that attaches to the podracing engines, so they can be displayed in a more correct hovering style, rather than just sitting on the ground. I rather wish that all vehicles in this range came with a clear stand, to have options for display (especially the Jedi Starfighter with hyperdrive ring). The vehicles snap onto the stands nice and securely, but are also removable if you prefer to display the vehicles without them (perhaps in a diorama setup).

The paint applications are colourful and tidy, with minimal weathering applied in appropriate areas. There is some minor articulation in the connectors between the engines and the cockpits, and the energy beam connectors are sculpted nicely.

Sebulba’s podracer –

Anakin’s podracer –

Overall, I think this is a fantastic set and a fine addition to our Micro Galaxy Squadron collection. The figures fit in the vehicles well, and the display stands give a more accurate ‘hovering’ presentation when on display.

Will you be adding this set to your collection? What vehicles do you hope to see in future waves of the Micro Galaxy Squadron line?

May the Force be with you!

The post Micro Galaxy Squadron Boonta Eve Battle Pack appeared first on Villa Varykino.

So many exciting new Hasbro The Vintage Collection figures lately! Celebrating the recent 20th anniversary of Attack Of The Clones, we have the new Anakin Skywalker ‘Padawan’ figure from AOTC – VC244.

We are still quite shocked to find this figure available on local store shelves, as it is still listed for pre-order on most international collectible websites. We were excited to get our first in-hand look at this Anakin figure, especially after the surprise appearance in a flashback in the Obi-Wan Kenobi series! I think Hasbro knew about those scenes, and put this figure in the same assortment as the first figures from the show.

Check out our unboxing video –

Anakin Skywalker ‘Padawan’ is VC244, as he appears in Attack Of The Clones. The backing card features a promotional photo of Hayden Christensen as Anakin Skywalker, from what looks like the Tusken Raider camp scene.

This figure is part of the assortment containing the first figures from the Obi-Wan Kenobi series – all the more interesting after discovering that this version of Anakin does appear in the series in flashback scenes.

Here in New Zealand, this TVC figure retails for NZ$29.99 each – which is approximately US$20.

So, our first look at the figure loose and up close.

This Anakin figure comes with an alternate ‘robotic’ hand, which is quite unique for Hasbro 3.75″ figures. This ‘padawan’ version of Anakin is from Attack Of The Clones – technically the gold version of his robotic hand is only seen in the closing wedding scene on Naboo, so it’s really interesting to see it included as an option here.

As expected, the figure also comes with two lightsaber accessories – a lightsaber hilt with peg that can attach to a hole on the left side of the belt, and an “activated” lightsaber with blue blade, that can be held for action poses. The figure also comes with a removable soft goods cloak, and attached soft goods lower tunic.

First up – the cloak. Anakin has a unique cloak in Attack Of The Clones – the front has strips, which is quite different to other Jedi cloaks. Unfortunately, his style doesn’t translate well in this small action figure scale – the front strips here don’t want to hang down the front. This is mostly due to the way they have been cut/sewn, as part of the back, so they naturally want to hang down the back. I understand a small change like sewing separate strips to the front would increase production time and costs, but it would have been a big improvement.

With a bit of wrestling, the strips do hang down the front, but that creates a bit of bunching at the shoulders. If I want to display this figure wearing the cloak, I would just lie the strips down the back for a cleaner (if not as accurate) look.

Personally, I prefer this figure without the cloak on, which is a shame – not very many Anakin Skywalker figures have come with a cloak. It can be easily removed – it sits on the figure with a loop of cord around the neck – not very accurate, but as Anakin’s cloak doesn’t have standard sleeves, it needs some method of staying attached to the figure and not just falling off.

Taking a closer look at the figure sculpt up close. I like the Jedi tunic details, some good fabric folds and lines here. The plastic lower front tabbards are joined together, so they lie straight and flat – though they do limit the hip articulation a little.

The padawan braid is curved to the front – it isn’t bent so it naturally sits forward. The hands hold the lightsaber well – though considering the options included here like the robotic hand, I wonder why they didn’t include a second lightsaber. Anakin uses other random lightsabers on Geonosis in the arena and in the fight against Dooku, so it would have been fun to include another here. I know I can always grab a spare lightsaber accessory from another figure, but that would have really make this figure into the definitive AOTC Anakin figure.

There are nice points of articulation at the neck, shoulders, elbows, wrists, waist, hips, knees, and ankles. The knee joints on our figure are quite tight, but better than being too loose. To be honest, most of our figures are displayed standing straight, with most posing done with the upper body, so I don’t really mind – I care more about the arms for lightsaber poses.

The detail continues nicely on the back, with the belt pouches and capsules, tunic fabric folds, and boot strap details all very well done.

Our figure unfortunately has a bit of a paint flaw on the back of the lower tabbards. It’s frustrating, but always a risk with Hasbro figures – thankfully it is on the back, as we very rarely pose a figure facing away, so it won’t be seen once displayed on our shelf.

I particularly like the soft goods lower tunic – it adds a nice touch to the figure, and matches nicely in colour to the top of the tunic. It allows for some flexibility of the legs without having to create large artificial cuts in a plastic tunic.

One of my favourite aspects of this figure is the alternate hand – as well as coming packaged with two standard ‘human’ hands, this Anakin figure also comes with a gold robotic right hand. This allows collectors to create a ‘post-Count Dooku fight’ version of Anakin, as we see him during the wedding on Naboo.

Of course we don’t really see Anakin fighting or holding a lightsaber with this version of his robotic hand (it is black in Revenge Of The Sith, and mostly covered by a glove), but I really like the options here. I always feel nervous pulling off parts like hands, but the switch was relatively easy – the robotic hand sculpt has a hole/gap at the wrist so I was careful not to force it too much when attaching, as it can flex and bend.

The lightsaber hilt accessory attaches nicely to the peg hole on the belt, tight but not too tight. I am not worried about it falling out or coming loose. Of course this attachment method always leaves a hole in the belt sculpt if displaying the figure with the activated lightsaber in hand, but I do think it’s one of the better ways of giving collectors the option of displaying the hilt on the belt – and given the style of the belt clip, the gap is not too distracting within the design.

Overall, a great figure. Yes I am frustrated that the cloak isn’t quite as good as I hoped (it really is tucked behind the figure when carded so you can’t really see it at all before purchasing), but I still like all the other design details. Good sculpt details, good articulation, and I love the alternate hands.

As a big fan of Attack Of The Clones, I am really happy to see a new sculpt of a character from the film – especially as this year marks the 20th anniversary. I hope we see more AOTC figures released this year, especially since there are still many Padme’ Amidala outfits that have yet to be made in the action figure line.

May the Force be with you!

The post Padawan Anakin Skywalker VC244 appeared first on Villa Varykino.

Today is the 17th anniversary of the release of Star Wars Episode II: Attack Of The Clones – a movie that has a special place in our personal story. This promotional banner for Attack of the Clones was the collectible behind the first time Kristy and I met in person. A meeting that took place on Valentine’s Day, no less.

The 150cm x 280cm vinyl banner is an advertising banner originally displayed in an Auckland, New Zealand cinema complex, and also used to promote the movie at Auckland Armageddon Expo in 2003. The banner features Anakin Skywalker and Padmé Amidala, with the teaser poster tagline ‘A Jedi Shall Not Know Anger. Nor Hatred. Nor Love.’

I was selling it on behalf of a friend, and Kristy was the keen buyer of this collectible. We’d made arrangements for Kristy to pick it up at an SWNZ swap meet, which happened to fall on 14th of February 2004 (they swap meet was originally set to take place on the 7th of February, but had to be re-scheduled due to booking conflicts at the venue).

Although we’d known of each other beforehand, through the SWNZ community, and had talked on the topic of Star Wars many times, that Star Wars memorabilia transaction was our first meeting. It was not entirely coincidental that an encounter based on a poster of Padmé Amidala and Anakin Skywalker ultimately paved the way to our engagement at Villa Balbianello, in Italy, the Episode II location where Padmé and Anakin’s wedding scene was filmed.

The post Episode II Theatre Banner appeared first on Villa Varykino.