Today’s unboxing features The Black Series HK-86 6″ Figure from The Mandalorian series. We were a little slow to jump into Black Series collecting, but it was The Mandalorian that really hooked us in, so we’re trying to collect as much as we can from the show in the Black Series 6″ range. HK-87 was a fun new droid design from the show, so we’re really happy to add him to our collection.

Check out my unboxing video –

This figure is part of Hasbro’s recent ‘plastic free packaging’ initiative, which means it has a windowless box. You can’t see the specific figure you are buying – which is not an issue if you predominately order online, but we mostly get our figures from local store shelves. Personally I like the opportunity to see the figure I’m choosing, and comparing the details, especially the paint job, with other figures on the shelf.

The windowless box also causes some headaches for collectors who keep their Black Series figures boxed – you can’t ‘display’ the figure anymore, it’s just a picture on the front. For the most part, we open our Black Series figures, but we appreciate the option for those rarer/collectible/exclusive ones we would choose to display sealed in the box.

Apart from the front missing the classic window, the rest of the packaging matches the modern Black Series boxes, with artwork on the right side slanted panel that forms a wider picture when displayed alongside other figures from the same series – in this case, The Mandalorian series. The colour scheme for The Mandalorian series packaging is orange, which we see in the stripe across the front with the series name, and used to accent the side panel artwork.

As the box notes, the packaging is free from plastic, with the exception of tape and glue. Inside, the figure is wrapped in ‘The Black Series’ branded tissue paper, held in place in a brown cardboard insert with some thin cardboard bands taped closed. The accessory (blaster) is stored inside a waxy paper pouch that is sealed closed, so it doesn’t fall out. All in all, this holds the figure well, and is easy to open – similar to how starships are packaged, but of course this only works in boxes without windows.

I was really keen to get my first in-hand look at this HK-87 droid figure – and I’m quite impressed. There is something quite striking about the colours, and that cool fabric half-cloak, it all really comes together in a neat design. Droids in particular often translate really well into action figure form, and this HK-87 is no exception.

This figure has all the standard articulation points you would expect from a Black Series 6″ figure. I was a little surprised to find that the grey shoulder ‘armour’ pieces are actually made from a soft plastic, so they can bend to allow you to pose the arm upwards without limiting movement.

Most of the different colours of this figure come from being made in different plastic colours, so there is very little paint application. The most notable painted details are the silver at the limb joints, the gold belt buckle, beige/grey stripes on the upper right arm, and some small silver details on the face – which are all quite tidy and well done on my figure.

This figure also includes a soft goods component – a dark brown fabric ‘half-coat’ worn on the left side, and held in place with a plastic bandolier-style strap. Some fabric cloaks look a bit awkward when scaled down to toy size, but the fabric used here is a good thickness and folds well when posing the left arm. The neckline edge of the half-coat is painted neatly in red, which helps to keep the fabric straight and tidy.

The hands on this figure are quite rigid for holding an accessory, but once you do get the blaster into place, HK-87 holds it well for poses. There is only one singular blaster accessory for this figure, but it looks good.

Overall, I think this HK-87 is a great figure – and now that I’ve seen it in person, I’ll definitely be on the look out for a second to build a cool Corvus scene with Din Djarin and Ahsoka Tano. Speaking of Ahsoka, I was really excited to see one of these assassin droids in the recent Ahsoka series trailer, so I’m sure we’ll see a variant figure from that show released in the future.

May the Force be with you!

The post Black Series 6″ HK-87 Figure appeared first on Villa Varykino.

Today’s unboxing features The Black Series NED-B 6″ Figure from the Obi-Wan Kenobi series. We really enjoyed the series, so we’re keen to build up an Obi-Wan Kenobi series action figure display with both TVC 4″ and Black Series 6″ figures. NED-B was a neat character in the series, and a fun new droid design so we’re really happy to add him to our collection.

Check out my unboxing video –

• Affiliate Link – Buy The Black Series NED-B 6″ figure on Amazon.com

This figure is part of Hasbro’s recent ‘plastic free packaging’ initiative, which means it has a windowless box. You can’t see the specific figure you are buying – which is not an issue if you predominately order online, but we mostly get our figures from local store shelves. Personally I like the opportunity to see the figure I’m choosing, and comparing the details, especially the paint job, with other figures on the shelf.

The windowless box also causes some headaches for collectors who keep their Black Series figures boxed – you can’t ‘display’ the figure anymore, it’s just a picture on the front. For the most part, we open our Black Series figures, but we appreciate the option for those rarer/collectible/exclusive ones we would choose to display sealed in the box.

Apart from the front missing the classic window, the rest of the packaging matches the modern Black Series boxes, with artwork on the right side slanted panel that forms a wider picture when displayed alongside other figures from the same series – in this case, the Obi-Wan Kenobi series. The colour scheme for the Obi-Wan Kenobi series packaging is a light blue, which we see in the stripe across the front with the series name, and used to accent the side panel artwork.

As the box notes, the packaging is free from plastic, with the exception of tape and glue. Inside, the figure is wrapped in ‘The Black Series’ branded tissue paper, held in place in a brown cardboard insert with some thin cardboard bands taped closed. The accessories are stored inside a waxy paper pouch that is sealed closed, so they can’t fall out. All in all, this holds the figure well, and is easy to open – similar to how starships are packaged, but of course this only works in boxes without windows.

The NED-B figure is primarily made in two colours – grey plastic at the joints and yellow plastic for the main body parts. This colour scheme is accented with dark grey/metallic weathering, and some blue painted details around the neck, left forearm, and backpack.

This figure is quite articulated as we would expect from a Black Series figure. Interestingly, I couldn’t get movement at the waist, instead the figure moves at the mid-torso join instead. Otherwise, it has all the joints and movements needed to pose for display.

It’s a little hard to show in photos, but the circular joints in his elbows, knees, and ankles have a clear plastic center, to give the effect of being hollow. A good option to maintain stability for poses, but still looks accurate to the original droid design. Considering the top-heavy nature of NED-B, he needs good stability in his legs so he doesn’t topple over.

For me, the frustrating part of this figure is the backpack. This was separate to the figure, and needs to be assembled to display. Putting the backpack on was relatively easy, it connects to the back of NED-B with a simple peg-and-slot attachment, but the problem is the small tubes on lower sides.

The tubes are attached to NED-B’s back and insert into the backpack once the backpack is attached in place. Simple in theory, but very tricky to actually do! Honestly, it took the both of us quite a few minutes to get those tubes into place – the dark grey knobs just below the attachment point really get in the way of your fingers. But anyway, once we finally wrestled them into place, it looks good.

NED-B comes with two accessories to hold – a hammer, and battle droid blaster. He holds the hammer really well, and it’s my favourite of the two accessories. His right hand has a finger pointed out like it would fit into the trigger section of the blaster, but his hands are bigger than a standard Black Series figure, and it looks like they used a standard blaster accessory, so he does hold it, but it’s a little awkward.

While there were a few frustrating notes with this figure (the windowless box and hard-to-put-on backpack), I think it looks really cool. The expression in the face captures the character well, he looks great holding his hammer, and the paint job really makes him look like a worn, beaten up old droid. I can’t wait to start building up our Obi-Wan Kenobi display – he is a fine addition to our collection.

May the Force be with you!

The post Black Series 6″ NED-B Figure appeared first on Villa Varykino.

I constructed my life-size R2-D2 replica back in the early 2000s. It was during the early days of the R2 Builders club (well before 3D-printing had taken off, and when a lot of design optimisation was still being worked out) which was a great community for advice and collaborating on parts runs for some of the more complex aluminium components. He is largely constructed from aluminium elements, but with some plastic, steel, and even wood detailing.

My version has remote-controlled electronics for dome rotation, dome lighting (PSI displays, logic displays, holoprojector), and sound effects. Because I always intended for him to be displayed in the 2-legged mode, I did not construct him with the goal of full mobility in mind. He has been on display at a local Auckland Armageddon convention before, but mostly lives amongst other life-size Star Wars statues in our rumpus room.

I have described my build process in parts over on the SWNZ website and forum in a lot more detail (links below), but the following gallery combines all of my progress photos in to one place in approximate chronological order.

• Building a Life-Size R2-D2, part 1
• Building a Life-Size R2-D2, part 2
• Building a Life-Size R2-D2, conclusion
• Electrifying Artoo (SWNZ Forums)

R2-D2 Replica Test Videos

R2-D2 Replica Work-In-Progress Gallery

The post Life-Size R2-D2 Replica (Progress) appeared first on Villa Varykino.